DIN Fasteners – Technical specifications – Part Conical spring washers for bolted connections (FOREIGN STANDARD) This standard specifies . Find the most up-to-date version of DIN at Engineering Standard DIN Fasteners – Technical specifications – Part Conical spring washers for bolted connections. German title.
|Published (Last):||5 July 2018|
|PDF File Size:||1.26 Mb|
|ePub File Size:||15.6 Mb|
|Price:||Free* [*Free Regsitration Required]|
DIN – European Standards
For tests at elevated temperatures, the bolts shall be exposed to the relevant test temperature for three hours and then tested within ten seconds following removal from the oven. Test assembly with distance blocks Key: In case of doubt, the German-language original should be consulted as the authoritative text. Domestic and commercial equipment. Fasteners – Technical specifications – Part Construction materials and building English price group 8 www. Textile and leather technology This standard specifies technical 276-26 for conical spring washers made of spring steel that are used for bolted connections to reduce loss of preload which is caused by setting.
When bolts are tested in accordance with subclause 6.
Our offices will be closed from December 24, to January 2, inclusive. Fluid systems and components for general use Road vehicles engineering fin Please first verify your email before subscribing to alerts. Health care technology Length and position of coated zone on bolts with non-standard coating 4. Adhesive residue in these turns is permitted unless this adversely affects bolting.
Add to Alert PDF. Page 6 DIN Where such coatings have been subsequently applied, requirements shall be the subject of agreement, it being of no relevance whether the coating has been applied before or after coating with adhesive.
Need more than 267-6 copy? The use of a new nut should be given preference, however. For dated references, subsequent amendments to or revisions of any of these publications apply to this standard only when incorporated in it by amendment or revision. The nut shall meet the following requirements.
In cases where the thread is not free from oil or grease, a lower breakaway torque is to be expected.
Other media and 267-266 temperatures shall be the subject of agreement. Foreword This standard has been prepared by Technical Committee Schrauben mit klebenden oder klemmenden Beschichtungen of the Normenausschuss Mechanische Verbindungselemente Fasteners Standards Committee.
Subscription pricing is determined by: Your Alert Profile lists the documents that will be monitored.
Conical spring washers for bolted connections. Petroleum and related technologies Designation of an M 12 steel bolt M 12with a nominal length, l, of 80 mm 80of property class 8. Aircraft and space vehicle engineering Bolts, screws and studs ISO Test nuts shall be used once only. The correct length and position of the coated zone is to be established by testing, where necessary.
Any additional requirements, such as those speci? Standards Subsctiption may be the perfect solution. We have no amendments or corrections for this standard. Packaging and distribution of goods Rubber and plastic industries Materials handling equipment Length and ddin of coated zone on bolts with standard coating 4.
Changes in the colour of the coating may be disregarded as long as the properties of bolts when tested remain unaffected.